Alto-professional KICK15 Bedienungsanleitung PDF herunterladen (Seite 20)

SPECIFICATIONS

Output Power: 400 W Peak (270 W LF @ 8 Ω + 130 W HF @ 8 Ω)

200 W Continuous RMS (135 W LF @ 8 Ω + 65 W HF@ 8 Ω)

Headphone output: 105 mW, 75 kΩ

Crossover: 3 kHz

Frequency Response: 65 Hz – 19 kHz (+ 3 dB)

Low Frequency: 15" (381 mm) woofer, 2" (51 mm) voice coil

High Frequency: Compression driver, 1" (25 mm)

Input Level: XLR (Mic, Ch. 1): -10 dBu max

1/4": -10 dBV nominal, 0 dBV max

RCA: -10 dBV nominal, 0 dBV max

Channel Gain: -∞ to +10 dB (Ch. 1 to Ch. 4)

Output Gain: -∞ to +10 dB (main mix output)

Maximum Available Gain: XLR (Mic, Ch. 1): 40 dB

Line: 30 dB

(including fixed preamp gain)

Connectors: Inputs: One XLR

Eight 1/4" TRS (4 stereo pairs)

One RCA stereo pair

One 1/4" TRS link

One 1/4" TS footswitch

Outputs: Two XLR (L/R)

Two 1/4" (L/R)

One 1/4" TRS subwoofer

One 1/4" TRS link

One 1/4" TRS headphone

Effects: Alesis DSP, 16 effects, 16 variations per effect

Vocal: Vocal 1, Vocal 2

Reverb: Large Hall, Small Hall, Large Room, Small Room, Plate Reverb,

Tape Reverb, Spring Reverb

Delay: Mono, Stereo

Modulation: Flanger, Chorus

Combination: Reverb+Delay, Reverb+Flanger, Reverb+Chorus

Power supply: 100 VAC (-10%/+15%), 120 VAC (-10%/+15%),

or 240 VAC (-10%/+15%); 50/60 Hz; IEC connector

Inrush current at initial switch-on: 1.01 A

Inrush current after power supply interruption: 1.81 A

Enclosure: Composite wood; perforated steel grille; 2 side handles, 1 top handle

Dimensions (H x W x D): 21.5" x 19" x 14.6" (546 mm x 483 mm x 371 mm)

Weight: Net (unit): 43.6 lbs.; 19.8 kg

Gross (shipping): 50.2 lbs.; 22.8 kg

altoprofessional.com

MANUAL VERSION 1.0

1 2 ... 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

Alto-professional KICK15 Bedienungsanleitung Seite 20

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Akustik Alto-professional KICK15